Spencer 202

Electronic pulmonary ventilator

The most advanced technologically in the pulmonary ventilator field. On an intensely luminous bar the following are visible:

the phase of the respiratory cycle
the regulation of the minimum pressure alarm
the regulation of the maximum pressure alarm
the regulation of the trigger limit

The system used to achieve the mixture of gas and the percentage of the oxygen concentration (60 or 100%) guarantees trustworthiness without varying the parameters of the capacity and the regulation of the pressure limit. A sophisticated software:

allows the automatic selection of the ventilation system, most suited to the clinical needs of the patient, controlled or assisted/controlled (ABS)
guarantees the management of the parameters with precision
reduces the “interrogation” period of ventilation, in favour of rapid response with adequate flow

0123		LXF
Interest	MC	MI	PA	SP	SV

Reliability and safety are guaranteed by numerous alarms. Spencer 202 includes an integrated system, complete with tested alarms with from the micro processor for apnoea, insufficient medical gas to guarantee a sufficient capacity and low battery. It additionally allows the manual selection and programming of the high and low pressure alarms. The ventilator automatically interrupts the supply of the medical mixture every time the pressure limiter exceeds 3 mbar of the value required. The non-breathing valve is supplied with a special pressure limiting device adapt use with both adults and children. The control instruments are designed in such a way as to allow clear and immediate reading. The indications have been reduced to the essentials and the commands are positioned in a logical position. Complete with

PVC patient circuit tube
Spencer Mask size 4
non-rebreathing valve

The Kompak and Porta Vent version are available.

Dimensions: 330 x 175 x h180 mm [12.99 x 6.88 x h7.08 in]
Weight: 4.8 kg [10.58]
Spencer 202 - EV01202A

Technical characteristics

Drive: microprocessor
Ventilation mode (automatic): controlled - assisted/controlled (ABS)
Frequency: from 5 to 40 BpM
Capacity: from 2 to 20 L/min
I/E connection: 1/2
Sensitivity trigger: from 0 to -20 cm H2O
Oxygen concentration: from 60 to 100%
Security valve: from 15 to 70 cm H2O
Medical gas power supply: 3,5 kg/cm ± 0,5 [12.04 lbs/in ± 2.82]
Battery duration: approx. 3 hours
Patient circuit: corrugated tube
Non-rebreathing valve: autoclavable

Alarms (luminous and sounding): maximum pressure, minimum pressure, apnea, battery
Alarm regulation: maximum pressure and minimum pressure
Other LED indications: insufficient medical gas and silencing of alarms
Reset alarms: 30 sec
Test LED
Digital keys
Vacuum manometer: from -20 to +70 cm [from -7.87 to +27.55 in] H2O, electric at a high luminous intensity
External power supply: 12 Vdc
Internal power supply: 12 Vdc
Structure: epoxy powder varnished aluminium
Panel: permanent marked polycarbonate

The alarms showing high and low pressure, disconnection, apnoea and insufficient medical gas, are visualised in a small area on the front of the panel, along with differently coloured LED, which codify the type of power supply and the state of the battery.

You can select alarms to show high and low pressure, disconnection and the trigger limit on coloured LED bar, red for positive pressure and green for negative pressure. The positioning of the indexes at the top of the knobs are relative to the parameters of ventilation for an adult of normal weight.

Thanks to the different colours of the rings parameter selection is easy and quick. The knobs have an orange indicator in order to improve reading even in low visibility conditions.

Kompak 202

Resuscitation system

0123			LXF
Embroidery	Transport bag		150 x 50 mm [5.90 x 1.96 in]	col 02	min 01
Interest	MC	MI	PA	SP	SV

The carrying panel for the emergency Spencer ventilator grants complete autonomy for the ventilator. Indispensable for transportation. Spencer Kompak 202 is composed of an epoxy powder varnished aluminium panel with a protective cover made of washable nylon. The cover is divided into sections to allow easy access to the internal apparatus. There are also some internal pockets for the positioning of accessories. The protective cover has a strap closure. The handle on the upper side allows an easy grip. It contains a 2 L oxygen cylinder, complete with pressure regulator fixed by wall hooks for safe positioning and easy replacement. It is supplied with all the joints needed for the connection of the ventilator to the oxygen supply of a centralised system. Complete with

aluminium structure
800 D nylon Oxford cover
Spencer 202 ventilator
2 L tank
pressure reducer
patient circuit tube
non-rebreathing valve
adult and paediatric masks
connection tube
power cable 12 V
Guedel airways
tongue forceps
mouth opener
Dimensions: 455 x 147 x h363 mm [17.91 x 5.78 x h14.29 in]
Weight: 13 kg [28 lbs]
Kompak 202 - EV02202A

Porta Vent 202

Rucksack version of resuscitation system

0123		LXF		R
Embroidery	Transport bag		150 x 50 mm [5.90 x 1.96 in]	col 02	min 01
Interest	MC	MI	PA	SP	SV

Made and structured to contain a pulmonary ventilator, 2 L oxygen tank and all that is necessary for ventilation management. The ventilator is fixed to an aluminium carrying panel. Flexible: because everything has a space. Modular: to adapt to your needs according to the situation. Long-lasting: to resist every condition. Innovative: it has a belt system for the shoulders that can support ten times more force and pressure than the most conventional pressure lifting system available on the market today. Complete with

aluminium structure
600 D nylon Oxford cover
Spencer 202 ventilator
2 L tank
pressure reducer
patient circuit tube
non-rebreathing valve
adult and paediatric masks
connection tube
power cable 12 V
Guedel airways
tongue forceps
mouth opener
Dimensions: 420 x 157 x h432 mm [16.53 x 6.18 x h17.00 in]
Weight empty: 4.5 kg [9.92 lbs]
Weight complete: 13.5 kg [29 lbs]
Porta Vent 202 empty - EV70170A
Porta Vent 202 complete - EV60202A